Durability: Up to 1 year

The fastest method of coating a vehicle with a ceramic scratch resistance compound is only possible with Nasiol MetalCoat F2 spray-on application.

Nasiol MetalCoat F2 can safely treat the surfaces of automobiles, bicycles, motorcycles, and trucks with its unique nano-coating formula by forming a single layer scratch resistance level.
 
WHY METALCOAT F2?
- Spray it and buff it! A simple worry-free application and cleaning.
- Instant gloss with an exceptional degree of water repellency.
- Perfect for detailing enthusiasts.
- Safe for exterior plastic trims.
- High scale resistance against destructive chemicals.
- Surface protection between 6 to 12 months.
 
APPLICATION
Ensure that temperature and relative humidity (RH) values (+5 ̊C ~ + 30 ̊C / 41 ̊F ~ 86 ̊F / 50% RH) of application space are as close as possible to suggested conditions to obtain maximum product performance. Avoid direct sunlight during the application and only work on cool surfaces. Wash your vehicle thoroughly. If required, apply clay bar.
After decontamination, apply polishing / compounding via using appropriate tools and silicone free / wax-free cutting compounds with respect to the physical condition of your vehicle’s surface.
When polishing is complete, wash the car and ensure that all the application areas are totally dry before using the product.
Prepare the surface by using Nasiol Clean to remove any residual contamination and dry with a lint-free microfiber cloth prior to the use of the product.
Before using the product, wear the protective nitrile gloves included in the box. Consumption is 3-4 mL/m² (3-4mL /10ft²). Spray on one square meter around 15-20 times with a standard MetalCoat F2 bottle and buff immediately with Nasiol Microfiber Cloth.Do not work on areas larger than 1 m²/10 ft² at once.
Consumption is 5-8mL/m² (5-8mL /10ft²). Spray on one square meter around 20-30 times with a standard MetalCoat F2 bottle and buff immediately with Nasiol Microfiber Cloth.
Do not work on areas larger than 1m²/10ft² at once. Keep the coated surface away from direct sunlight, dust, water and contamination during 24 hours curing period.